Ovaj oglas je neaktivan.
Pronjuškaj slične oglase.
Treble bleed mod Duncan style 1000pF/150K
- Cijena
- 5 €
Šifra oglasa: 32817903
Osnovne informacije
- Lokacija
- Primorsko-goranska, Rijeka, Belveder
- Stanje
- novo
Opis oglasa
Treble Bleed Mod Duncan style 1000pF/150K ±1% Tolerance Sliver Mica Capacitors & Metal Film Resistors
This is a PARALLEL or "Seymour Duncan" type treble bleed circuit.
Is the tone on your guitar or bass getting muddy or dark as you roll off the volume? This is an unfortunate side effect of the electrical resistance of potentiometers and pickups. As you roll off the volume, a "low pass filter" is created. The result is that your tone will get inconsistently darker as you lower volume.
A Treble Bleed circuit (or, "high pass filter") will help retain highs as you roll off the volume of your guitar or bass.
Simple to install - just solder to the lugs of your volume pot(s) as shown in the image. This mod takes only a couple of minutes and requires only basic knucklehead soldering skills. The circuit itself is completely assembled/soldered, as shown in the photos. You need only solder the two main leads to your volume pot.
Capacitor: Expensive Soshin Sliver Mica 1000pF ±5% tolerance
Resistor: Metal Film 150k Ohm 1/4 Watt ±1% tolerance
5 eura komad.
RASPRODANO!
Šaljem poštom.
No SMS!
This is a PARALLEL or "Seymour Duncan" type treble bleed circuit.
Is the tone on your guitar or bass getting muddy or dark as you roll off the volume? This is an unfortunate side effect of the electrical resistance of potentiometers and pickups. As you roll off the volume, a "low pass filter" is created. The result is that your tone will get inconsistently darker as you lower volume.
A Treble Bleed circuit (or, "high pass filter") will help retain highs as you roll off the volume of your guitar or bass.
Simple to install - just solder to the lugs of your volume pot(s) as shown in the image. This mod takes only a couple of minutes and requires only basic knucklehead soldering skills. The circuit itself is completely assembled/soldered, as shown in the photos. You need only solder the two main leads to your volume pot.
Capacitor: Expensive Soshin Sliver Mica 1000pF ±5% tolerance
Resistor: Metal Film 150k Ohm 1/4 Watt ±1% tolerance
5 eura komad.
RASPRODANO!
Šaljem poštom.
No SMS!
Karta
Napomena: Prikazana je približna lokacija
- Oglas objavljen
- 15.01.2026. u 13:09
- Do isteka još
- oglas istekao
- Oglas prikazan
- 3738 puta