Ovaj oglas je prodan.
Pronjuškaj slične oglase.
Ispitivač napona AC-DC 12V-220V
- Cijena
- 13,27 €
Šifra oglasa: 15016976
Osnovne informacije
- Lokacija
- Osječko-baranjska
- Stanje
- novo
Opis oglasa
Features & Specifics:
-osvijetljeni zaslon
-jednostavan za rukovanje
-služi za pregled instalacija, provjeru gubitka napona i prekid istog.
-perfektan je i za pregled božićne rasvjete
-koristi se i za utvrđivanje faza i nula u instalaciji.
-testni napon: 12~250V istosmjerne i izmjenične struje
-Materijal: metal i plastika
-Dimenzije: 16cm x 2.5cm x 1.5cm.
How to use:
This product is suitable for direct detection of 12V-220V AC and DC and
indirect detection of the zero line, phase line of AC and the detection
of breakpoint.
Voltage detection
1 The final figures is the voltage value.
2 It will indicate the lower value if not reach 70%of display value of
the high value.
3 Please touch the negative pole when test the voltage of DC.
4 Inductance can be used when test the item with lower than 12V voltage
5 It must be connected to ground or the zero when test the item with the
induction.
Sensor detection
When detect line side by side, please increase the space between the lines
or hand-hold the detected item.
Break detection
Move along the phase line, when there is nothing shows in the display
window, it is the breakpoint.
-osvijetljeni zaslon
-jednostavan za rukovanje
-služi za pregled instalacija, provjeru gubitka napona i prekid istog.
-perfektan je i za pregled božićne rasvjete
-koristi se i za utvrđivanje faza i nula u instalaciji.
-testni napon: 12~250V istosmjerne i izmjenične struje
-Materijal: metal i plastika
-Dimenzije: 16cm x 2.5cm x 1.5cm.
How to use:
This product is suitable for direct detection of 12V-220V AC and DC and
indirect detection of the zero line, phase line of AC and the detection
of breakpoint.
Voltage detection
1 The final figures is the voltage value.
2 It will indicate the lower value if not reach 70%of display value of
the high value.
3 Please touch the negative pole when test the voltage of DC.
4 Inductance can be used when test the item with lower than 12V voltage
5 It must be connected to ground or the zero when test the item with the
induction.
Sensor detection
When detect line side by side, please increase the space between the lines
or hand-hold the detected item.
Break detection
Move along the phase line, when there is nothing shows in the display
window, it is the breakpoint.
- Oglas objavljen
- 14.01.2016. u 12:53
- Do isteka još
- oglas istekao
- Oglas prikazan
- 2339 puta