DIN voltmetar ampermetar mjerač snage i energije 220v 100A PZEM-008

PZEM-008 Digitalni DIN ampermetar voltmetar mjerač snage i potrošene električne energije s integriranim strujnim trafom.
Jednostavan za montažu, velik i lako čitljiv digitalni display. Prikladan za kontrolu raznih električnih strojeva i instalacija.
Za napone 50-300V i struje do 100A
Na lageru uobičajeno 3+ komada


šaljem dostavom po želji o trošku kupca ili osobno preuzimanje
ako se šalje preporučenom poštom uz avansno plaćanje na račun poštarina je 15kn
Ako se šalje preporučenom poštom+ plaćanje pouzećem cijena slanja je cca 30kn
Slanje Oversease 35-40kn, na račun ili pouzećem
Slanje GLS 45-55kn, na račun ili pouzećem

Features:

Measurement of voltage, current, power and energy; LCD Digital display shows the voltage,
current, power and energy show on the screen at the same time.
This module is suitable for indoor, please do not use outdoor.
Applied load should not exceed the rated power.
Store energy data when power off, button available for controlling

1.Voltage
Measurement range: AC50～300V
Starting test voltage: 50V
Accuracy: ±1%
2.Current
Measurement range:0～100A
Display format:
＜10A display such as：9.99A
＜100A display such as：99.9A
Starting test current:0.02A
Accuracy: ±1%
3.Active Power
Measurement range:0～30kW
Display format:
＜10W display such as：9.99W
＜100W display such as：99.9W
＜1000W display such as：999W
＜10000W display such as：9.99kW
≥10000W display such as：30.0kW
Starting test power:0.5W
Accuracy: ±1%
4.Energy
Measurement range:0～1999kWh
Display format:
＜10kWhdisplay such as：9.99kWh
＜100kWhdisplay such as：99.9kWh
＜1000kWhdisplay such as：999kWh
＜10000kWh display such as：1999kWh
Over the test range will maintain the data, otherwise you reset it.
Accuracy: ±1%

Other Function

1.Backlight control
The backlight can be turned on or off by short press the key
2.Reset energy
Long press the key over 3 seconds until the energy data flash, then release the key, short press the key again to reset the energy, otherwise after 3 seconds it will stop flashing and the energy will not
be reset.
3.Data Storage When the power off, the energy data and backlight status can be saved.

pogledajte moje ostale oglase na:
http://www.njuskalo.hr/korisnik/Macaktom