MOTU 828 audio interface

...prodajem ! Najbolje za mac OS korisnike...nikako na zelenu granu sa windowsima !

828 Specifications:
Analog Mic/Line Inputs (2) Neutrik combo XLR and ¼" with preamps and phantom power
Analog Line Inputs (6) balanced ¼" (+4 dBu)
Analog Line Outputs (8) balanced ¼" (+4 dBu)
Main Analog Outputs (2) balanced ¼" (+4 dBu)
Digital I/O (1) optical in (Lightpipe or S/PDIF); (1) RCA in (S/PDIF);
(1) optical out (Lightpipe or S/PDIF); (1) RCA out (S/PDIF)
A/D Converters 24-bit, 64× oversampling
D/A Converters 24-bit, 128× oversampling
Sampling Rates 44.1, 48 kHz
Sync (1) 9-pin ADAT in
FireWire (1) IEEE 1394 port
Footswitch (1) ¼" TS, software programmable
Headphones (1) ¼" TRS stereo
Power Supply internal; IEC connector
Dimensions 1U × 5" (D)
Weight 3.75 lb.

Review:
Offers 18 simultaneous I/O and connects to a Mac or PC via Firewire - no PCI card needed. Easy to install and configure - on Mac, it's managed via a control strip module!
The front panel has trim pots for the analog inputs configured as stereo pairs - essential if you're using this as a mixer replacement.

Latency can be set between 128 samples (3ms) to 1024 samples (40ms). I tried 128 and it was very stable - it handled multiple audio tracks and VSTis without any pops. You can do hardware monitoring using CueMix (included) if you want true zero-latency monitoring.

Analog Channels 1+2 have XLR+1/4" combo inputs and preamps. They sound good!