Yongnuo RF 603C bežični okidači (za Canon) 2x

OPIS PROIZVODA:

This is an multifunctional item which can be used to synchronically trigger studio lights,as well as release shutter.
It is using FSK 2.4GHz wireless frequency, suitable to use this free channel in many countries, guarantee of the transfer speed, distance and stability. Within capacious areas,the remote control distance may reach to 100m.
The synchrinization speed can reach to 1/320 (but some may reach to 1/250 or less)
It consist of 2 same transceivers.Both of them can be a receiver as well as as transmitter.It can trigger 2 flashes at the same time with one set (one on the camera,and one off-camera flashgun).You can also buy additional transceiver(s) to trigger 3 or more flashed at the same time.

Functions:
1. Can work as a wireless shutter release control

★ Has the function of Auto-Focus, Continuous shooting, Long Exposure, Half-Way Pressing, Full-way Pressing
★Press the buttom of transmitter to control camera.
★Press the camera shutter bottom to contral camera.
★If your camera doesn't have the hot shoe, you can use the related PC Sync Plug which can connect camera and receiver.

2. Work as a wireless flash unit trigger/receiver

★ Has the function of firing the flash speedlite,
Amount the transamitter into hot shoe of camera, connect the receiver with the flash speedlite, please half-way of shutter button to wake up the flashgun at the same time, the green signal light will be bright for some seconds, and then full press shutter button to fire the flashgun and take a picture. ( This " Wake up " function is only support the flashgun which having the sleep mode )

★ One transmitter/receiver can trigger more than 2 receivers at the same time, so you can trigger more than 2 flashes at the same time. You can buy extra receivers depends on your flashgun.

★ Using the Flash PC Sync Cable, the transmitter can wirelessly synchronously trigger the off-camera flash(es) which is mounted on the receiver(s). At the same time, you still can use the camera hot shoe for another flash.

3. Wilrelessly trigger studio flash
Using the Studio Flash Sync Cable, the transmitter can wirelessly synchronously trigger the Studio Flash(es). It is a good kit for studio photography.

Advantages compare to RF-602:

1. Transmitte and recevier are same.Transmitter can be used as receiver,and receiver also can be used as transmitter.It is much conveneint than RF-602 on this point.

2.After the RF-603 is installed on the camera,you can also install a flash on it (just support manual function,no TTL),but the RF602's transmitter can not connect to a flash without a hot shoe slot.

3.The Rf-603 can fire off-camera flashgun the release as well as remote release shutter.The RF-602 can also works this way,but it needs one more trigger.

Parameter:

Type---FSK 2.4GHz wireless remote sustem
Transmitter Distance---100M
Channel---15 difference channels and All channels
Release---Half-way press, Full-way Press
Transmitter Terminal---PC 3-Pin input terminal
Receiver Terminal--Yongnuo 3-pin output terminal
Time of shooting---Up to 20000 times (Using CR2 Lithium battery)
Receiver Stand-by time---Up to 45hours (Using AAA battery)
Dimensions---37mm x 30mm x 81.5mm (W x H x D)

Podržava:
Canon EOS 1000D 500D 450D 400D 350D 300D 300 300V 50E 50D 50 33 30 60D

PAKET SADRŽI:

Transceiver x 2
Shutter Connecting Cable x 1
3.5mm Plugx 1
English manual x 1
(Original Manufactory Package)

recenzije:
http://www.amazon.com/Yongnuo-Wireless-Trigger-Shutter-Transceiver/dp/B004YW79F4

p.s. dostupan je još jedan par
cijena za svih 4 komada odjednom je 750 kn